Purchase a Raspberry Pi staking wallet today!
 
Supported Coins:
Quantisnet
HyperStake
BitGreen
Vulcano
Monetary Unit
Particl
Blackcoin
DSTRA
ColossusXT
EUNO
Solaris
Aegeus
RPIcoin
Phore
Syndicate
Radium
Stratis
Pinkcoin
Neblio
QTUM
NebliDex
Trezarcoin
NAVcoin
 
Note: Depending on the cryptocurrency coin, either a Raspberry Pi 3B+ or 4 will be delivered. This is due to different wallets being built on certain/specific build dependencies.
 
Pi 4 Specification:
	
Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
	
1GB, 2GB or 4GB LPDDR4-3200 SDRAM (depending on model)
	
2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
	
Gigabit Ethernet
	
2 USB 3.0 ports; 2 USB 2.0 ports.
	
Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
	
2 × micro-HDMI ports (up to 4kp60 supported)
	
2-lane MIPI DSI display port
	
2-lane MIPI CSI camera port
	
4-pole stereo audio and composite video port
	
H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
	
OpenGL ES 3.0 graphics
	
Micro-SD card slot for loading operating system and data storage
	
5V DC via USB-C connector (minimum 3A*)
	
5V DC via GPIO header (minimum 3A*)
	
Power over Ethernet (PoE) enabled (requires separate PoE HAT)
	
Operating temperature: 0 – 50 degrees C ambient
* A good quality 2.5A power supply can be used if downstream USB peripherals consume less than 500mA in total.
 
Pi 3B+ Specification:
	
GPU: Dual Core VideoCore IV® Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode. Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure
	
Processor: Broadcom BCM2387 chipset, 1.2GHz Quad-Core ARM Cortex-A53, 802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)
	
Memory: 1GB LPDDR2
	
Operating System: Boots from Micro SD card, running a version of the Debian Stretch
	
Dimensions: 85 x 56 x 17mm
	
Power: Micro USB socket 5V1, 2.5A